The same as our 9082K single-end banjos, but with hose on both sides. For perfect proportions, we make them from big diameter stainless steel material with a recess lip on each side to hide the gasket and move the bolt head closer to the banjo. We kept the wrench surfaces short, knocked the corners off the hex and rounded the bolt head too. They’re sized to fit both 5/16inch and 3/8inch hose, with plenty of fuel flow guaranteed. On Ford flathead applications, check for gauge clearance on your top radiator hoses. Note: To provide safe clearance with a 3×2 progressive linkage, banjo fittings must be used with our stainless banjo spacers (9086K). Will not provide clearance for progressive linkages on 6×2 systems. All direct linkages clear OK without spacers.